PC composition of Jürgen, alias ''Polli''

Place of residence: Berlin (Germany)

Introduction: general description to the system

[Home]

Hello, below you find all data to my computer configuration.
Basis nForce3 platform with a modified EPoX EP-9NDA3 + Mainboard
and an AMD Athlon64 3500 + processor, Winchester core [water cooled]

vdimm Mod with pot and resistor by guide of user Polygon The Rebels Haven Computer Forum

My PC System Socket A:

Last update: 27.04.2006

Processor CPU:

Type:

AMD Athlon64 3500 Winchester core processor

Clock Speed (MHz)

2200 MHz @ 2646 MHz

V/Core / C&Q

1,40 V @ 1,61 V , C&Q disabled

Orig. reference clock FSB:

200 MHz

Current reference clock FSB:

294 MHz

Current system clock:

2646 MHz

Orig. CPU multiplier:

Current CPU multiplier:

CPU Temp. normal operation
basis of diode measurement

~ 28 ° C. according to ambient temperature

CPU Temp. stress operation
basis of diode measurement

~ 37 ° C. according to ambient temperature

CPU modification:

none

Processor CPU Cooling

	Processor CPU cooler:		1A-Cooling
	Description:		Water cooler [color darkly blue]
	Modifications:		none
	240er Radiator by 1A-Cooling Radiator with Fans		1A-Cooling processor water cooler

Memory

	Memory in Slot#1		512 MB G.Skill PC4800(DDR600)
	Memory in Slot#2		512 MB G.Skill PC4800(DDR600)
	Memory ID: Memory Type:		F1-3200DSU2-512LA / F1-3200DSU2-1GBLA DDR unbuffered
	Orig. Memory clock:		600 MHz
	Current Memory clock:		588 MHz
	Memory voltage vdimm		Normally 2.9 volts, current 2.94 volts
	Memory Chips		Samsung TCCD, preselected on Brainpower PCB
	Bios Latency timings: Cas Latency/T(RP)/T(RCD)/ T(RAS)/Command Rate		3-4-3-8-1T

Power supply [PWS]

	Manufacturer and model name:		Antec 480 TrueBlue 480PEC
	Power supply performance:		480 watts
	Form factor / Fans:		ATX / 2 Fans
	Ampere values:		+5V 38A, +12V 22A, +3.3V 30A
	Transient Response:		+5V,+12V and 3.3V outputs return to within 3% in less than 1ms for 20% load change.
	Special connectors:		2 Serial ATA connectors, 2 sep. fan adapers
	Of extra:		Blue lighting on transparent fans
			Photo: Antec.com

PC case housing

PC case housing:

Casetek 1018 color: black

Form factor:

Midi Tower ATX

Of extra:

Plexi glass window, left side

USB / Fire Wire:

2 USB 2.0 und 1x Firewire on the top side of case

Dimensions:

20,5 cm (W) x 54 cm (H) x 55 cm (L)

Insertions 5.25 Zoll

Insertions floppy 3.5 Zoll

Insertions hard disc 3.5 Zoll

Fan assembly (maximall)

up to 6 x 8 cm of case housing fans in my version
2 behind, 2 in front, 1 left side (without use), 1 top

Peculiarities:

Disk drives are inserted about adapter decoupled.

Modifications:

Side fan fixture taken from case.
Additional housing insulation with foam material
Fans and power supply decoupled inserted.
Ein three colour lasers light (blue/green/red)
Enheim-1048 water pump station with expansion tank into
PC case. Pump has an own 220 volts supply unit.
Water temperature controlling with LCD Display.

Mainboard view into the PC Tower

VDD chipset water cooling
incl. Aluminium fixing frame
by Innovatek

Fan window at the top is empty after mod.

Water cooling first days in the test

Case Housing cooling / ventilation

	Housing ventilation in front:		1x Enermax 8 x 8 cm, adjustable [throttled] 1250 U/min 1x Artic Cooling Pro TC 8 x 8cm with temp. regulation
	Housing ventilation behind:		1x Enermax 8 x 8 cm adjustable 1x Cooltek Silent Breeze 8 x 8cm, adjustable [throttled]
	Top housing fan:		BeQuiet Silent 8 x 8 cm with temp. regulation 925 U/min

Dektop Screen / TFT Dispay

	Manufacturer:		Videoseven
	Designation:		V7 L17SP
	Specification LCD:		17" Samsung Smart Panel, a-Si Aktiv Matrix TFT
	Response time:		25 ms
	Visible screen diagonal:		17.1" Zoll
	Pixel distance:		0,264 mm x 0,264 mm
	Max. Dissolution:		1280 x 1024
	Max. vertical frequency:		75 hertz
	Max. horizontal frequency:		61 hertz
	Contrast rate:		350 : 1
	Brightness:		250cd / m²
	Signal entrance:		15 pin D-Sub
			Connection of the monitor by changeover switch to change between two pc systems

Mainboard
nForce Ultra Chip

Mainboard Name:

EPoX 9NDA3+ Revision: 2.1 mit Mod.

Chipset:

nForce3

Anward Bios version:

9ND35202 vom 02/02/2005

Serial/ATA (Raid) and IDE disk:

yes

Memory slots:

4 Dimm DDR memory

Connectors:

6 x USB, 2 x Fire Wire, PS/2 for keyboard and mouse,
Gigabit Ethernet Lan/ Wan, Gameport, 1 COM Port

Mainbaord chipset temperature
in normal operation:

31-33 °C according to ambient temperature

Northbridge tension VDD
1.6 to 1.75 volts

1.65 volts

Plug board connections:

AGP 8 fold, 5 x PCI

On Board audio:

Audio Codex 8 channel AC'97 2.3
Audio clinch 3-fold 5.1, Optical S/PIF in/out

Mainboard modifications:


	Mosfets heatsinks Mainboard Overview with pre installed Watercooling

Vdimm mod. on up to 3.15 volts by guide of Polygon
nForce 3 chipset water cooling by Innovatek
SATA chipsatz heatsink
Mosfets mini heatsinks
PWN voltage controller chipset mini heatsink
vdimm voltage controller chipset mini heatsink
Audio chipsatz mini heatsink

Vdimm mod. up to 3.15 volts with pot and resistor

nForce3 Ultra Chipset water cooling

Link: 9NDA3+ Awards

Graphic card AGP

	Manufacturer:		ATI
	Designation:		mad-moxx enhanced: 9800 Pro
	Chipset:		ATI 98X R360 [ATI Chipset Picture]
	Graphic card memory / Bus width:		256 MB , 256 bits
	parallel Rendering Pipelines		8
	Bios version:		R360 Hynix DDR BIOS 113-A22701-100 (ST M25P05)
	Connectors:		VGA, DVI, TV-out
	GPU Core clock (not overclocked)		380MHz, as an enhanced version already on: 420
	Memory clock (not overclocked)		680Mhz (340Mhz DDR specification)
	GPU Core clock (Overclocked)		437 MHz
	Memory clock (Overclocked)		692 Mhz (346Mhz DDR specification)
	Modifications:		enhanced: Sapphire 9800 Pro Cooling: 1A-Cooling GPU water cooler Passive coolers on all 8 memory modules
	GPU Water Cooler down view		ATI mad-moxx enhanced: 9800 Pro, water cooled GPU water cooler

Hard disk and CD disk drives:

	1. S-ATA disk drive (Primary - Master)
	Disk drive name:		Samsung P80
	Designation:		SP1213C
	Max. storage:		120 GB
	Speed:		7200 U/min
	Interface:		S-ATA
	Connected in:		S-ATA Controller 1
	Boot up disk drive:		yes
	Cache:		8 MB
	3. IDE disk (Secondary - Master)
	Disk drive:		CD/DVD Brenner
	Manufacturer / Name:		Lite On SOHW-1673S
	Reading speed / writing speed:		Writing speed DVD R: 16 Writing speed DVD RW: 6 Writing speed DVD+R: 16 Writing speed DVD+RW: 8 Writing speed DVD+DL: 4 Writing speed CD R: 48 Writing speed CD RW: 24 Reading speed CD-ROM: 48 Reading speed DVD ROM: 16
	Interface:		IDE Ultra-DMA/33
	Connected in:		IDE Controller 1
	Cache:		2MB

Operating System: Windows XP Home Edition

	Operating system Updates		Service Pack I as well as all known Patches
	Disk drive defrag program:		PerfectDisk 6.0
	Nvidia Mainboard driver:		nForce 6.13 Mix 5.10 for Mainboard chip incl.driver for On-Board audio chip.
	Graphic card driver:		Catalyst 4.9 original
	WAN/LAN driver:		Ethernet Cicada
	Hardisk paging file size:		512 MB

Externally connected periphery

	Connection:		USB1.0
	Manufacturer and model:		Logitech Optical wheelmouse

	Connection:		PS/2
	Manufacturer and model:		Vivanco Internet keyboard, color: blue

	Connection:		USB 2.0
	Manufacturer and model:		Microsoft Sidewinder Joy Stick

	Connection:		Audio
	Manufacturer and model:		Creatativ Inspire P580 5.1 activ loudspeakers

	Connection:		LAN/WAN
	Manufacturer and model:		D-Link DI-604 DSLand network High Speed Router with hardware firewall
	Application:		Internet DSL-and network connection

nForce2 and 3 Base by Polli
* Help & AMD Overclocking *
nForce Mainbord Information Webpage and Hardware News

PC composition of Jürgen, alias ''Polli'' Place of residence: Berlin (Germany)

PC composition of Jürgen, alias ''Polli''

Place of residence: Berlin (Germany)